Main -> Heating units, refrigerating units -> Temperature controllers -> Water baths, oil baths
Water Baths, GFL

For gentle steaming work with Erlenmeyer flasks, glasses, columns etc. Temperature range from approx. 5°C above ambient to boiling point. Temperature control by tension thermostat, protection of the heating element by overtemperature cut-out. The adjustable water level regulator is a standard feature. The units have the TÜV "proven safety" symbol (GS) and CE mark.

Steam bath type 1023

Bath, frame and perforated floor above the heating element made of stainless steel. Sets of rings made of plastic is a standard feature. The square cover frame (W 265 mm x L 265 mm) is removable. Its 9-part set of rings, made of heat-resistant plastic material can be parted. Its diameter can be varied in approx. 20 mm steps (min. 32.5 / max. 173.5 mm).
Housing made of electrolytically galvanised sheet steel, powder coated. Adjustable water level regulatoris mounted on the back.
For 230 V, 50/60 Hz, 1.0 kW power supply (other voltages upon request).

TypeOuter W × H × D
mm
Useful W × H × D
mm
Vol. approx.
l
Wght approx.
kg
Connec.
kW
Order No.
(1)1023342×180×400240×120×240791.044 11 11023


Accessories
ArticleOrder No.
Support rod 1985 made of stainless steel44 11 11024

316 mm long, 12 mm dia.

Test tube rack 1933 made of stainless steel44 11 11026

For test tubes with 100 openings of 18 mm dia. each



Water baths for fume hoods type 1031 and 1032

Special bath, also suitable for use with fume hoods (digestories). Bath, removable recessed lid with holes and perforated floor above the heating element made of stainless steel. The openings in the lid are covered by sets of rings made of heat-resistant plastic material. The standard adjustable water level regulator is mounted on the right-hand side of the bath.
For 230 V, 50/60 Hz, 1.5 kW power supply (other voltages upon request).

TypeOuter W × H × D
mm
Qty openingsOpening Ø
mm
Useful height
mm
Wght approx.
kg
Connec.
kW
Order No.
(2)1031430×155×3006 911006.11.544 11 11031
(3)1032670×155×30081111008.21.544 11 11032


Multiple water baths type 1041 and 1042

Bath frame with openings and parted perforated floor plate above the heating element made of stainless steel. Housing made of electrolytically galvanized sheet steel, power coated. The openings in the frame are covered by heatresistant plastic ring sets. A support rod of 600 mm length, 12 mm diameter, made of stainless steel, is behind each opening. Water level regulator is mounted on the left-hand side.
For 230 V, 50/60 Hz power supply (other voltages upon request).

TypeOuter W × H × D
mm
Qty openingsOpening Ø
mm
Useful height
mm
Wght approx.
kg
Connec.
kW
Order No.
(4)1041682×190×232413190121.044 11 11041
(5)1042982×190×232613190161.544 11 11042


Preservative for water baths and shaking water baths

ProAquaTop avoids the formation of algae, bacteria and moulds. Biodegradable. Use biocides safely. Always read labelling and product information before use.
Highly efficient: only 1 ml per litre of water. A necessary change of water is indicated by fading of the blue colouration.

ArticleTypeOrder No.
(6)ProAquaTop 1× 200 ml191010 11 01910
ProAquaTop 3× 200 ml191110 11 01911
ProAquaTop 6× 200 ml191210 11 01912