Main -> Separating systems -> Evaporation -> Evaporators
Vacuum Concentrator, Eppendorf
Concentrator plus

The Concentrator plus has a new LCD-display as well as a user-friendly control panel with clear assignment of the function keys to the display. The Concentrator plus is available in two versions: as complete system with integrated, maintenance-free vacuum pump or as Concentrator single device, which can be connected to an existing vacuum pump. Both configurations enable a quick and efficient - and at the same time gentle - vacuum concentration of the samples (e.g. DNA/RNA, proteins). The complete system contains a condensate separator, which purifies the outgoing air to up to 85% and thus protects from unpleasant odours. At the same time, an automatic condensate evacuation extends the life span of all components, which encounter the vapours. A big selection of fixed-angle rotors, which can be loaded with up to 144 samples by stapling, as well as the micro test plate rotor A-2-VC make it possible to use the Concentrator plus for a wide range of applications in the laboratory.

Product features:

  • Small width of 32 cm saves precious space on the laboratory bench
  • Chemical-resistant PTFE-membrane pump
  • Chemical-resistant stainless steel tank
  • Very quiet operation, even with running pump
  • Automatic condensate evacuation
  • Three freely selectable operation programmes (watery, alcoholic or high vapour pressure), depending on solvent used → reducing expenditure of time to up to 20 %
  • Four heating levels available (room temperature, 30°C, 45°C, 60°C), which enables safe and efficient concentrating of different samples
  • Centrifugation and desiccator function
  • Complete system with connection for external devices offers additional flexibility
ArticleOrder No.
(1)Concentrator plus complete system10 69 50215

with built-in diaphragm pump and 48 × 1.5/2.0 ml fixed-angle rotor
Concentrator plus complete system10 69 50614

with built-in diaphragm pump, with junction for external devices (e.g. gel-dryer), without rotor
Concentrator plus complete system10 69 50410

with built-in diaphragm pump, without rotor
Concentrator plus basic device,10 69 50010

with 48 × 1.5/2.0 ml fixed-angle rotor


Swing-bucket rotor A-2-VC

Max. tube capacity

Two buckets for

  • 0.2 ml PCR tubes
  • 5-tube or 8-tube strips
  • PCR plates
  • Microplates
  • Cell culture plates
  • Deepwell plates (max. height = 27 mm)
  • Slides (with CombiSlide® adapter)
TypeTube capacity
ml		Tube dim. (Ø×L or L×W×H)
mm		Tube capacity per rotorOrder No.
(2)A-2-VC96 × 0.2128 × 86 × 27
26 × 751)		210 69 45009



1) with CombiSlide® adapter

3 Fixed-angle rotors
TypeTube capacity
ml		Tube dim. (Ø×L or L×W×H)
mm		Tube capacity per rotorOrder No.
F-45-72-80.58×317210 69 34007
F-45-70-111.5
2		11×41
11×47		7010 69 32004
F-45-48-111.5
2		11×41
11×47		4810 69 30001
F-45-24-1262)12×67-1002410 69 36000
F-50-8-161516×97810 69 41003
F-50-8-18162)18×105-128810 69 42000
F-45-8-171517×120810 69 38002
F-40-36-121.512×323610 69 40007
F-45-36-15615×483610 69 35003
F-45-16-206.5
10		20×42
20×55		1610 69 43006
F-40-18-191019×661810 69 37006
F-45-12-312031×551210 69 44002
F-35-8-242524×86810 69 39009
F-35-6-305029.5×116-123610 69 47001



2) Min./max. tube length and max. volume, respectively.

Accessories
ArticleOrder No.
Rotor spacer10 69 16005

required for stacking rotors F-45-72-8 and F-45-48-11
Adapter for CombiSlide® (set of 2)10 69 06005
Adapter55 69 16001

For 0.5 ml micro centrifuge tubes and 0.6 ml Microtainers®, 6 pieces
Adapter55 69 15005

For 0.2 ml PCR tubes, 6 pieces
Work trays10 69 24235

for 96 x 0.2 ml PCR tubes (set of 10) and plates without frame
Frame for work tray (set of 5)10 69 24243