Main -> Stirring, shaking systems -> Stirrers -> Stirrers
Stirrers, IDL

Laboratory stirrers for all stirring tasks up to the "medium viscosity" range. Handy size, slender design and minimal weight, insertable stirring rods and universal use of stirring tools by means of a precision chuck are all outstanding features of these units.

Stirrers for stirring capacities up to 200 l

 

Technical Data RED 100 C / RED 100 CT / RED 100 SD:

Drive:

permanently actuated DC drive

Speed:

40 to 2000 rpm / 10 to 500 rpm / 40 to 2000 rpm

Power output:

220 Watt / 220 Watt / 180 Watt

Maximum torque:

150 Ncm / 600 Ncm / 100 Ncm

Maximum range of chuck:

1 to 10.5 mm

Viscosity:

medium to high viscosity

Mains voltage:

230 V, 50 Hz

Operating mode:

continuous

Permissible ambient temper.:

+5°C to +60°C

Weight:

5 kg / 5.5 kg / 5 kg

Dimensions (W×D×H):

78×170×190 mm / 78×170×215 mm / 78×170×190 mm


ArticleOrder No.
(1)Stirrer RED 100 C51 00 20100

Very powerful stirrer for laboratories and test centers, hollow shaft and chuck (10.5 mm), electronically adjusted speed, digital display, RS232 interface.
 
ArticleOrder No.
Stirrer RED 100 CT51 00 21100

Same device as the RED 100 C, however with a lower speed range of 10 to 500 rpm and a higher torque, dafür of 600 Ncm; ideal for working with higher viscosity media.
 
ArticleOrder No.
Stirrer RED 100 SD51 00 22100

High-performance stirring motor with four-digit speed display. The speed range of this stirrer is microprocessor-controlled (fuzzy logic) and infinitely adjustable from 40 to 2000 rpm. The maximum torque output is 100 Ncm. Hollow shaft and chuck (10.5 mm). The gradual start-up of the motor increases safety and prevents unnecessary splashing.


Accessories
ArticleOrder No.
Special holding clamp RE 10051 00 22110
U-stand51 00 22120


Stirrers for stirring capacities up to 100 l

Powerful laboratory stirrer, chuck, shaft well up to 10.5 mm, electronically controlled speed, 50 Ncm torque.

 

Technical Data RED 10 and RE 10:

External dimensions (W×D×H):

65 × 100 × 108 mm
(plus 55 mm for the chuck)

Weight:

approx 2.1 kg

Power supply:

230 V~, 50/60 Hz

Nominal torque:

approx 50 Ncm

Speed:

50 to 1600 rpm, infinitely variable

Power output:

85 W


ArticleOrder No.
Stirrer RED 10 with digital display51 00 22010
(2)Stirrer RE 10 without digital display51 00 21010


Stirrer for stirring capacities up to 50 l

Electronically controlled, sturdy laboratory stirrer, 18 Ncm, stirring rod non-insertable.

 

Technical Data RE 18:

Drive:

Permanently actuated DC drive

Speed range:

110 to 2000 rpm (RE18)

Power output:

85 W

Torque across the total speed range:

18 Ncm (RE18)

Chuck range:

0.5 to 10.5 mm

Viscosity of medium:

RE18 low viscosity medium (runny)

Mains voltage:

200 V to 250 V, 50/60 Hz
or 110 V, 50/60 Hz

Diameter of arm:

13 mm

Weight:

approx 2.1 kg

Dimensions (W×D×H):

65 × 108 × 100 mm
(plus 55 mm for chuck)

Permissible ambient temperature:

+5°C to +40°C
max. 80% relative humidity

Permissible operating time:

100%


ArticleOrder No.
(3)Stirrer RE 1851 00 23010



Supplied without the illustrated accessories