Shaking incubators 3031, 3032 and 3033 with orbital motion
GFL shaking incubators with orbital motion are universally applicable for shaking jobs requiring exactly reproducible orbital motion and temperatures up to +70°C, e.g. for incubations, fermentations, homogenizations, chemical and biochemical reactions, enzyme and tissure studies and the cultivation of bacteria cultures.

• Temperature range: from 8°C above ambient temperature to +70°C, serial cooling coil for operation below ambient temperature to connect to the water mains or to an external refrigerated circulator
• Temperature range (Operation with cooling coil): +20°C to +70°C (dependent on cooling media and ambient temperature)
• Temperature constancy (temporal): ± 0.2°C
• Temperature regulation: microprocessor-controlled, PID type
• Temperature setting and display: via LED display, in steps of 0.1°C
• Over-temperature cut-out: electronical / dependent on the set value, to protect the test substances, and electro-mechanically, to protect the unit
• Under-temperature cut-out: electronical, max. 9.9°C below set temperature
• Shaking motion: orbital, can be switched on and off
• Shaking frequency regulation: microprocessor-controlled
• Shaking frequency displayand setting: digital - LED
• Incubation time:microprocessor-controlled, 1 minute to 999:59 hours
• Time display and setting: digital - LED
• Fast and exact temperature setting, exact reproducibility of set values, such as temperature, shaking frequency and incubation time, due tomicroprocessor-technique
• Integrated serial interface RS 232 for remote control of measuring, controlling and regulating tasks via PC, compatible with "labworldsoft®" PC software
• Optimum temperature distribution throughout the cabinet interior with a ventilator
• Electronic function monitoring
• Silent and robust shaking mechanism with gentle start-up and even orbital motion, independent of load, set shaking frequency and incubation time
• The microprocessor-controlled timer displays continuously the current remaining running time of the incubation time and signals acoustically its expiry
• Membrane keyboard with prominent symbols
• The units come with the CE mark

Model 3031: with lift-up acrylic glass cover, approx. 46 l useful volume. Capacity: 1 shaking tray. Outer housing made of heavy-duty ABS and powder-coated, electrolytically galvanized sheet steel.
Model 3032: Acrylic glass window in the door, approx. 45 l useful volume. Capacity: 2 shaking trays, for vessel height of more than 150 mm, 1 shaking tray.
Model 3033: Acrylic glass window in both doors, approx. 150 l useful volume. Capacity: 2 shaking trays, for vessel height of more than 180 mm, 1 shaking tray.
Models 3032/3033: Outer housing made of powder-coated, electrolytically galvanized sheet steel.

Shaking table with four plastic pins to accommodate the shaking tray, the non-slip mat or the universal mount (accessories) made of aluminium.

1) Supplied without the illustrated accessories

Chamber interior and insides of doors made of stainless steel. Basic equipment includes frame rack for trays. Fluoresent lamp for interior lighting.

1) Supplied without the illustrated accessories

Chamber interior and insides of doors made of stainless steel. Basic equipment includes frame rack for trays. Fluoresent lamp for interior lighting.

1) Supplied without the illustrated accessories

Made of stainless steel (type 3966 and 3970), with holes to accept clamps for Erlenmeyer flasks and other accessories (see also shakers 3011 to 3018 (3966) and 3019/3020 (3980), here).

Made of stainless steel, to be screwed onto shaking trays 3966, 3970 and 3980. Complete with fixing material (see also shakers here).

Max. quantity of flask clamps per shaking tray:

3032 (Shaking tray 3970): From clamps 300 ml only 1 tray applicable
3033 (Shaking tray 3980): From clamps 1000 ml only 1 tray applicable
Other clamps on request

Made of stainless steel, for a max. of 24 test tubes Ø 12 to 17 mm, perforated part can be tilted by 90°, with clamping springs for secure hold and silent shaking of the tubes, to be screwed onto shaking trays 3966, 3970 und 3980. Capacity: 3966/6, 3970/3, 3980/9 racks (see also shakers 3005 and 3006, 3015 to 3020).

Made of stainless steel, for attachment of a test plate, for screwing on to shaking trays 3966, 3970 and 3980. Capacity: 3966/6, 3970/6, 3980/15 test plates. Complete with attachment material (see also shakers 3005 and 3006, 3015 to 3020).

For the shaking platform. For slow moving e.g. of nutritions in petri dishes and culture bottles (see also shakers 3011 to 3018, here).

For secure fixing of different shaking objects between the six rubber-coated bars. (see also shakers 3011 to 3018, here).