This practical system solution was developed for comfortable handling of small-volume samples in the laboratory.

• Sample handling: volumes between 0.01 ml and 250 ml
• 100 Watt, 24 Volt motor with safety transformer
• Compact size: 220 mm × Ø 44 mm
• Softstart speed control from 0 to 25000 min-1
• Dispersing units with diameters of approx. 3, 5, 7 and 12 mm
• Fast coupling for exchange of our dispersing units
• CE-mark, tested pursuant to IEC 61010, protection class IP 20

HS 1200 E: Holder system for drive unit, transformer, four dispersing aggregates and two tools
ST-P13/320: Height adjustable plate stand incl. holder for drive unit

Practical system solution with speed preselection and PC interface for reproducible results. The intelligent electronic control checks the preset speed and signals deviations resulting from a change in viscosity.

• Sample handling: volumes between 0.01 ml and 250 ml
• Digital display with memo function of the saved speed
• 100 Watt, motor processor-controlled
• Compact size: 210 mm × Ø 40 mm
• Softstart speed control from 2,000 to 30,000 min-1 with LED and membrane keyboard
• Fast coupling for exchange of dispersing units
• Dispersing units with diameters of approx. 3, 5, 7 and 12 mm
• CE-mark, tested pursuant to IEC 61010, protection class IP 20

Same as for PT 1200 E

ST-P00/200: Hinge stand (gas spring) incl. holder for dispersing aggregates and tools
ST-P12/600: Plate stand with special drive extension for PT 1300 D. Incl. vessel holder with boss head and safety positioning ring

Stand dispenser of the 500 Watt category

• Sample handling: volumes between 0.05 and 2,500 ml
• Driven by a 500 Watt motor, 230 V, 50/60 Hz
• Integrated electronic speed control and stabilization up to 30,000 min-1, also with load changes
• Digital LED speed indication, softstart function
• Small-footprint "Slim line" housing, noise-insulated
• Various versions of different dispersing units are available
• 157 × 76 × 236 mm (W × H × D), 1.8 kg
• CE-mark, complies with RoHS, UL/CSA standards and regulations
• Standards acc. to EN / IEC 61010, 61326-1 for EMC & safety

Same aggregates as for PT 1200 E, further diameters/sizes:

ST-P11/600: Plate stand with one rod design. Boss head for drive unit can rotate horizontally
ST-P20/600: Plate stand with two rod design. Boss head for drive unit can not rotate for extra safety

All stands without vessel holder, boss head and safety positioning ring

Vessel holder for fixing any mixing/processing tank. Suitable for the safety-stand incl. boss head.
The safety ring avoids any uncontrolled downwards movement of the drive unit. Can also be used to fix the working height.

Powerful stand dispenser of the 1200 Watt category

• Sample handling: volumes between 0.01 ml and 10,000 ml
• Driven by a 1,200 Watt motor, 230 V, 50/60 Hz
• 95 × 210 × 247 mm (W × H × D), 3.2 kg
• Electronic speed control and stabilization up to 30,000 min-1, also with load changes
• Acoustic alarms
• Integrated overheat, overload, and lock-up protection and softstart function
• Small-footprint "Slim line" housing
• Various versions of dispersing units are available
• Choose between 3 different stand versions
• CE-mark, complies with RoHS, UL/CSA standards and regulations

ST-P10/600: Plate stand with one rod design. The plate stand allows for easy and safe height adjustment of the drive. The drive is safely attached to the stand and protected against rotating around the extension by means of a new type of boss head clamp/drive extension with an easy-to-use knurled screw.