For sampling of liquids from precisely determined depths. Telescopic suction tube can be varied to a maximum length of 100 cm.

Operation
1. Set the desired sampling depth by adjusting the suction lance
2. Attach the sampling bottle to the adapter
3. Lower the suction lance into the medium
4. Create a vacuum with the hand pump and collect the sample
5. Remove the filled sampling bottle, close and label it

• PP suction tube, PVC suction hose
• Incl. 5 sample bottles PP at 250 ml and 500 ml each, hand vacuum pump and adapter for sample bottles 100 to 1000 ml, 20 seal-it bottle seals in transport case.

Stainless steel hose weight. Sampler for deep, narrow and hard-to-reach spots. The heavy-duty metal tube brings the hose to any desired depth. Once again the samples are collected using a hand-operated pump and transferred directly into sampling bottles to ensure sampling purity.

Operation
1. Lower suction hose to desired depth
2. Attach sampling bottle to adapter
3. Create a vacuum with the hand pump and collect the sample
4. Remove the filled sampling bottle and label it

• PVC suction hose, 2.50 m long
• Incl. sample bottles PP 1000 ml, hand vacuum pump and adapter for sample bottles 100 to 1000 ml, hose weight V2A, 20 seal-it label seals in case

Specially for combustible liquids of hazard class A I (e.g. gasoline). There is an electrically conductive connection between the glass bottle and both parts are grounded with an earth cable.

Operation
1. Connect to ground
2. Lower the suction hose to the required depth
3. Plug the adapter on the sample bottle
4. Create a vacuum with the hand pump and collect the sample
5. Remove, close and label the filled sample bottle

• PTB approval D-333-009 618/00
• Incl. 4 m hose, glass bottle 1000 ml, vacuum pump, grounding cable and hose weight in case