 |
|
| Main -> Measuring systems -> Electrochemistry -> pH meters |
| Laboratory pH Meters, METTLER TOLEDO |
FiveEasyTM pH Meter
The device can be used for different applications in many areas, such as in food and beverage industry, in water or environment analysis.
The price-performance ratio and a compact design with need for little space characterise these devices.
Technical data: |
pH-range: | 0.00 to 14.00, resolution: 0.01 pH |
mV-range: | -1999 to 1999, resolution: 1 mV |
Temperature range °C: | 0.0 to 100.0, resolution: 0.1°C |
Calibration: | max. 2 points, 3 pre-defined buffer groups |
Display: | LCD |
Power supply: | ext. power adapter (standard) |
| Article | Order No. | |
| FiveEasy FE20-Basic | 10 50 02910 | |
| FiveEasyTM measurement device, user manual, short guide, power adapter | |
| (1) | FiveEasy FE20-Kit | 10 50 02911 | |
| same as FE20-Basic, plus ph-electrode LE409, electrode arm, 2 buffer bags pH 4.01 and 7.00 | |
| FiveEasy pH FE20 ATC Kit | 10 50 02916 | |
| same as FE20-Kit, but with electrode LE438 incl. temperature sensor | |
2 pH/ion meter SevenCompact™
New, extremely powerful device for measuring the pH (210) or pH and ion concentration (220): - 4.3″ color display with u-Focus™: switchover of the information on the display
- PIN-protected routine or expert mode, full GxP support
- Full text menu navigation in 10 languages
- ID management: user/specimen/sensor ID, intellig. Sensor Managem. (ISM)
- Calibration with pre-and user-defined buffer groups, calibration timer
- Automatic, manual, or time-controlled limit point detection; limit point criteria are separately
- Measurement of the ion concentration with pre-defined ions
- Internal memory for measured values for 1,000 data records, data export via USB flash drive
- 2 USB interfaces for PC, connection of a USB scanners or keyboard
- U-Place™: unique electrode holder with absolutely vertical movement
- Control function for a stirrer available as an option
Technical data: | |
pH-range: | -2.0 to 20.00, resolution 0.001 / 0.01 / 0.1 |
mV-range: | -2000 to 2000 mV, resolution 0.1 / 1 |
Ion concentration: | 0 to 1000% / 0 to 10000 ppm / 1.0 E-9 to 9.99 E+9 mg/l |
Temperature range °C: | -30.0 to 130.0°C, resolution 0.1 |
| Article | Order No. | |
| S210-Basic | 10 50 09025 | |
| Device, U-Place™ electrode holder, mains adapter, certificate | |
| S210-Kit | 10 50 09026 | |
| same as S210-Basic plus electrode LE438, calibration buffer | |
| S220-Basic | 10 50 09028 | |
| Device, U-Place™ electrode holder, mains adapter, certificate | |
| S220-Kit | 10 50 09029 | |
| same as S220-Basic plus electrode InLab Expert Pro-ISM, cable, calibration buffer | |
| S220-Bio | 10 50 09031 | |
| same as S220-Basic plus electrode InLab Routine Pro-ISM, cable, calibration buffer | |
| S220-U | 10 50 09032 | |
| same as S220-Basic plus electrode InLab Versatile Pro, cable, calibration buffer | |
| LabX direct PC software | 10 50 02876 | |
| S220-Micro | 10 50 06985 | |
| same as S220-Basic plus electrode InLab Ultra Mirco, cable, calibration buffer | |
| S220-uMix | 10 50 06986 | |
| same as S220-Kit plus. uMix magnetic stirrer | |
| (3) | Printer RS-P25 (with RS232 cable) | 10 50 04300 | |
| Bar code scanner case (without cable) | 10 50 01297 | |
| USB cable for bar code scanner | 10 50 01309 | |
Sensors: look at ISM-/InLab-sensors, more accessorie savailable on request.
Professional modular instrument for pH/redox potential, conductivity/salinity/TDS and ion concentration/dissolved oxygen (DO) measurements. For equipment or subsequent extension with 1, 2, or 3 measuring modules of any type. Properties of the SevenExcellenceTMbasic unit: - Huge 7 high-resolution display and capacitive touch screen with clear buttons for perfect ease of operation
- Limitless modularity and flexibility: up to 3 measuring modules can be operated in parallel, easy to expand to 2 or 3 channels
- Universal communication via USB, Ethernet (LAN) and RS-232
- Full text menu guide in 10 languages with Help menu
- Unique OneClickTM operation concept (individually configurable functions/processes at a push of a button)
- Methods memory
- Utmost safety and GxP support (ID protection, sophisticated user management, limits/alarms, integrated radio timer)
- Intelligent Sensor Management (ISMTM)
- Connection of stirrer, automatic sample changer, PC, barcode scanner, keyboard, printer (local or in the network)
- Memory for 20,000 data records (measured values, calibrations, methods)
- U-PlaceTM electrode holder with absolute vertical movement
Technical data: |
pH-measuring range: | -2.000 to 19.999 |
Resolution: | 0.001/0.01/0.1 |
mV: | -1999 to +1999 /0.1 |
Temperature: | -5.0 to 130.0°C, resolution 0.1 |
Conductivity: | 0.01 µS/cm to 1000 mS/cm |
TDS: | 0.1 mg/l to 2000 g/l |
Special inhibitors: | 0.00 to 2000 MOhm × cm |
Salinity: | 0.00 to 80.00 ppt |
Ion concentration: | 9 × 10-9 to 9.99 × 10+7, resolution ±1 Digit |
DO/BOD (O2): | 0,000 to 50 mg/l or ppm |
Saturation: | 0 to 500% |
Air pressure. | 500 to 1100 mbar |
Temperature: | 0 to 50°C |
|
Measuring module pH: |
- 1- to 9-point calibration with automatic buffer recognition
|
- 8 predefined buffer buffer records, 1 buffer record freely definable
|
- Automatic temperature compensation with Pt1000 sensors or NTC 30 kOhm
|
|
Measuring module conductivity: |
- Automatic recognition of calibration status
|
- Description of calculated cell constants/entering of known cell constants
|
- Selectable reference temperature (20 or 25°C)
|
- Linear, non-linear temperature compensation or USP/EP mode
|
|
Measuring module concentration/pH: |
- Like pH measuring module plus:
|
- 2- to 9-point calibration for determination of concentration
|
- Storage of calibration data for up to 10 ISE-sensors
|
- Direct measurement, standard or sample addition/subtraction
|
|
Measuring module DO/BOD (dissolved O2/biol. O2 demand): |
- 2-point calibration, 2 predefined, 1 user-defined standard
|
- Automatic temperature and air pressure compensation
|
- Optical (InLab OptiOx) or polarographic sensors (InLab 605)
|
- Biol. O2 demand: predefined methods according DIN 38409 and EPA
|
| Article | Order No. | |
| S400-Basic | 10 50 06240 | |
| incl. pH module, 2 × blank modules, electrode arm, LabX direct software, certificate | |
| S400-Kit | 10 50 06241 | |
| same as S400 plus electrode InLab Expert Pro ISM, cable, 3 × 2 buffer bags | |
| S400-Bio | 10 50 06242 | |
| same as S400-Kit, but with glass electrode InLab Routine Pro ISM and cable | |
| S400-ISFET | 10 50 06243 | |
| same as S400-Kit, but with ISFET electrode InLab 490 | |
| S400-Micro | 10 50 02982 | |
| same as S400-Kit but with InLab Ultra Micro and cable | |
| S400-uMix | 10 50 02983 | |
| same as S400-Kit plus uMix magnetic stirrer | |
| S700-Basic | 10 50 06244 | |
| incl. conductivity module, 2 × blank modules, electrode arm, LabX direct software, certificate | |
| S700-Kit | 10 50 06245 | |
| same as S700 plus electrode InLab 731 ISM, 4 bags of calibration standard | |
| S700-Trace | 10 50 06246 | |
| same as S700 plus electrode InLab Trace ISM and flow cell, 4 bags of calibration standard | |
| S470 | 10 50 06252 | |
| incl. 1 × pH-, 1 × conductivity module, 1 blank module, electrode arm, LabX direct software, certificate | |
| S470-Kit | 10 50 06253 | |
| same as S470 plus pH electrode InLab Expert Pro ISM, Lf electrode InLab 731 ISM, 12 × calibration buffer/standard | |
| S470-USP/EP | 10 50 06254 | |
| same as S470 plus pH glass electrode InLab Pure Pro ISM, cable, Lf electrode InLab741 ISM, 2 × calibration buffer/standard | |
| S500-Basic | 10 50 06248 | |
| incl. pH/ion module, 2 × blank modules, electrode arm, LabX direct software, certificate | |
| S500-Kit | 10 50 06249 | |
| same as S500 plus pH electrode InLab Expert Pro ISM, 8 × calibration buffer | |
| S500-Bio | 10 50 06250 | |
| same as S500-Kit plus pH electrode InLab Routine Pro ISM, cable | |
| S500-F | 10 50 06251 | |
| same as S500-Kit plus ISE electrode PerfectIon Fluorid | |
| S475-Basic | 10 50 06255 | |
| 1 × pH-, 1 × conductivity module, 1 × pH/ion module, electrode arm, LabX direct software, certificate | |
| Extension unit/pH module | 10 50 04472 | |
| Extension unit/pH/Ion module | 10 50 04471 | |
| Extension unit/conductivity module | 10 50 04473 | |
| S600-Kit | 10 50 02985 | |
| 1 × DO/BOD module, 2 × blank modules, O2 electrode InLab 605-ISM, electrode arm, LabX direct software, certificate | |
| S900-Basic | 10 50 02984 | |
| 1 × DO/BOD module, 2 × blank modules, electrode arm, LabX direct software, certificate | |
| S900-Kit | 10 50 02986 | |
| same as S900-Basic plus O2 electrode InLab OptiOx | |
| S900-BOD | 10 50 02987 | |
| same as S900-Kit, plus adapter for BOD/BSB bottles | |
| S479-Kit | 10 50 02988 | |
| same as S470-Kit plus DO/BOD module and O2 electrode InLab OptiOx | |
| S975-uMix | 10 50 02989 | |
| same as S479-Kit plus uMix magnetic stirrer | |
More versions and accessories available on request. | 
|
|