VGKL Laboratory Catalogue Issue 15


Main -> Control equipment, evaluation equipment -> Electronic controllers -> Electronic controllers

Temperature Controllers, messner

1 TEMPAT^® temperature controller

Electronic 2-point controller with fiberglass reinforced plastic housing for controlling heating coils, hot plates, ovens, infrared radiators, water baths, etc. The device has built-in sensor breakdown protection and a switching interval display. The sensor is connected via a tip jack.

Technical data:
External W × H × D:	110 × 70 × 188 mm
Weight:	1 kg
Power supply:	220 to 240 V~, 50/60 Hz
Rating:	2300 W (10 A)

Sensor type	Temperature range °C	Order No.
Pt 100	0 – 100	71 65 50250
Pt 100	0 – 400	71 65 50251
Fe-CuNi	0 – 600	71 65 50252
NiCr-Ni	0 – 1200	71 65 50253

2 TEMPAT^®-D temperature controller

Same as TEMPAT® except with additional built-in digital display for the actual value and encoder switch for selecting the nominal temperature.

Sensor type	Temperature range °C	Order No.
Pt 100	0 – 400	71 65 50260
Fe-CuNi	0 – 600	71 65 50261
NiCr-Ni	0 – 1200	71 65 50262

3 TEMPAT^®-DSI temperature controller

Configuration same as TEMPAT®-D, except with additional integrated 2-pole irreversible excess temperature or probe breakdown safety shutoff. Fault lamp and warning signal, re-start button, second sensor input jack, potentiometer for setting the threshold temperature and monitoring on LED display.
Rating: 1800 W 8 A.
Option for all 3 TEMPAT® controllers: recorder output available for 0 – 20 mA, 0 – 1 V or 0 – 10 V.
The scope of delivery of TEMPAT® controllers does not include feelers. For temperature feelers that match and are ready for connection, see accessories. If no temperature feeler was ordered, the connection plug suitable for the device is loosely attached.

Sensor type	Temperature range °C	Order No.
Pt 100	0 – 400	71 65 50280
Fe-CuNi	0 – 600	71 65 50281
NiCr-Ni	0 – 1200	71 65 50282

4 TEMPAT^®-DSI temperature controller

Safety temperature switch for monitoring all kinds of temperature control tasks. Ideal for complementing simple temperature controllers. Very suitable for monitoring the temperature of heating tapes, heating mantles, water baths and other heaters which are prone to failure of a switch element and to temperature increases to prohibited high ranges.

Simple operation: plug heater which is to be monitored in the output plug of TEMPAT®-Control, place feeler in the spot which is to be monitored. Set desired temperature limit on the scale. The device now monitors the connected heater. If the set temperature limit is exceeded, the device turns off the connected heater. An optical and acoustic alarm is triggered, which continues even if the temperature falls below the set temperature limit. For reconnection, press reset key.
Rating: 1800 W 8 A.

Sensor type	Temperature range °C	Order No.
Pt 100	0 – 600	10 65 50290
Fe-CuNi	0 – 700	10 65 50291
NiCr-Ni	0 – 1300	10 65 50292

5 Accessories
Sensors for TEMPAT^®, TEMPAT^®-D, TEMPAT^®-DSI controllers and TEMPAT^®-Control

	Article	Order No.
	Resistance probe Pt 100	71 65 50111
	4301 stainless steel sensor tube, 2.5 mm dia., 250 mm long, with 2 m cable and connector, 2-wire
	Resistance probe Pt 100	71 65 50121
	as above, except 3.0 mm dia., 3-wire
	Resistance probe Pt 100	71 65 50100
	as above, except 2.0 mm dia., 2-wire
	Resistance probe Pt 100	71 65 50101
	as above, except 1.6 mm dia., 2-wire
	Resistance probe double PT 100	10 65 50161
	as above, except 3.0 mm dia., 2-wire
	Glass probe Pt 100	71 65 50131
	4.3 mm dia., 35 mm long, with 2 m cable and connector, 2-wire
	Glass probe Pt 100	10 65 50171
	as above, except 3.0 mm dia., 250 mm long, 2-wire for all temperature controllers TEMPAT/TEMPAT-D/TEMPAT-DSI/TEMPAT-Control
	Thermocouple Fe-CuNi	71 65 50141
	austenitic stainless steel jacket, 1.5 mm Ø, 250 mm long, with 2 m compensation line and connector
	Thermal sensor NiCr-Ni, Ø 1.5 mm	71 65 50151
	Inconel jacket, otherwise as above
	Thermal sensor NiCr-Ni, Ø 1.5 mm	10 65 50181
	100 mm long, otherwise as above

Other diameters and lengths on request.

Other self-optimizing temperature controllers with digital display of nominal and actual values: TEMPAT®3000 MCS and MCSI series, and TEMPAT®3000 MPR series program controllers with various options on request.